!
Note: If the filter is expired, the buzzer will keep beeping when producing
water to remind users of replacing filter. Filter life may vary
depending on source water quality and water usage.
When the system is powered on, you will hear a beep. All indicators will
be on for 3 seconds, and then the system will automatically flush for 30
seconds. After flushing, if there is no water production, it will turn into
standby status.
Power-on
Water production
When the system is producing water, the power indicator will flash in blue.
TDS display
When the system is powered on and keeps producing water for 1 minute,
the system will automatically test the TDS of RO water. The TDS reading
will be unchanged if the system is in standby status or is being flushed.
Filter life indicator
Different colors suggest different remaining lifespan:
A. Indicator constant lit in white: the filter is normally working
B. Indicator flashed in red: the filter lifetime is about to be expired
(remaining lifespan <5%)
C. Indicator constant lit in red:the filter is expired
Long-time operation reminder
When the system keeps producing water continuously for 30 minutes, the
system will enter into protection status and all the components stop working.
The indicators will flash in red. In this condition, please unplug the power for
10 seconds then power on again.
Automatic flushing
A. Flushing when powered on: when powered on, the system will be
automatically flushed for 30 seconds.
B. Flushing when cumulative water production reaches 10 minutes:
If the cumulative water production reaches 10 minutes, after returning
into standby status, it will be automatically flushed for 10 seconds.
FRIZZLIFE INC.
www.frizzlife.com
Page 10
Model: PD1000-TAM4
