Fig
.
7
Fig
.
8
Fig
.
9
Fig
.
10
Fig
.
11
Fig
.
12
Shut off the water supply. (Fig.7)
Disconnect the cold water pipe from angle valve.
Twist the feed water valve onto the angle valve and make sure the O ring
is loaded. (Fig.8)
Connect cold water pipe onto the feed water valve. (Fig.9)
Valve installation complete.
Remove all the plugs by pressing the fitting sleeves (Fig.10)
Connect the other end of 3/8" tubing into "Supply" port on the back of the
system, make sure to insert the tubing about 0.8 inch to the end of the
fitting, ( Fig.11)
Put the lock clip on the fitting to secure the connection. (Fig.12)
Step 3: Connect the water supply (COLD WATER ONLY)
Step 4: Connect the "SUPPLY" water tubing
FRIZZLIFE INC.
www.frizzlife.com
Page 5
Model: PD1000-TAM4
