Configuring FRITZ!Box Fon ata by Phone
58
FRITZ!Box Fon ata – 7 Configuration and Operation by Telephone
If you return to Caller No. 1 by pressing the Hold button, the
connection to Caller No. 2 is not cleared down until Caller
No. 2 hangs up. Connection charges continue to accrue.
7.2 Configuring FRITZ!Box Fon ata by Phone
Saving New Settings
In this section, saving refers to all current settings. It is not
necessary to save the configuration after each setting is
made. You may first configure all of your FRITZ!Box Fon ata’s
settings as desired, and then save them permanently.
Saving Permanently
Permanent saving cannot be reversed. However, you can re-
set the PBX to its factory settings or program it with different
settings.
Call No. 2
P
If the call is answered, you can consult on this
line. The original caller is still on hold.
R
If the number you dialed is busy or the call is not
answered, press the Hold button again to return
to Call No. 1.
R1
To switch back to Call No. 1 after talking on the
second connection, dial the sequence shown at
left. Call No. 1 is now active again.
Call No. 1
P
You can also return to Call No. 1 by hanging up the
handset: this ends the connection to Call No. 2.
In this case, your phone rings as soon as you
hang up. Pick up the handset to return to Call
No. 1 again.
O
Hang up the handset to end the connection.
N
Pick up the handset.
r91ss
Save all settings made to your
FRITZ!Box Fon ata permanently dial-
ing the sequence shown at left.
O
Hang up the handset.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
