Baby Monitoring Phone Function
FRITZ!Box Fon ata – 7 Configuration and Operation by Telephone
61
Disabling the Busy on Busy Function
Baby Monitoring Phone Function
The baby monitoring phone function allows you to use your
PBX to monitor sounds in the room. A PBX extension must be
located in the room to be monitored. Enter a code to activate
the room monitoring. Lay the handset is next to the phone or
activate the speaker phone. The volume level of the phone
can be set to any of eight levels.
It is preferable to use the speaker phone function.
To activate the baby monitoring phone function, proceed as follows:
Dial the number of the extension to listen in at an extension
with room monitoring activated.
After initiating a baby monitoring phone call, the PBX cannot
generate a new call until at least one minute has lapsed.
N
Pick up the handset.
r52
Ext.
s0s
Dial the sequence shown at left.
Type in the number of the extension
in the “Ext.” field.
r91ss
Save your settings if desired by dial-
ing the sequence shown at left.
O
Hang up the handset.
N
Pick up the handset or activate the
speaker phone function of your tele-
phone.
s4
Level
s
Number
r
Dial the sequence shown at left. For
“Level”, enter a number between 1
(the most sensitive sound level) and
“8”. For “Number”, enter the number
to be called. This may be the number
of another internal extension, a “9” for
an internal group call, or any external
number desired.
Q
Wait for the acknowledgement tone.
Baby monitoring is now activated.
Do
not
hang up the handset!
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
