Alternating Between Calls
FRITZ!Box Fon ata – 7 Configuration and Operation by Telephone
55
Alternating Between Calls
Whenever you have one active connection and one caller on
hold, you can switch from one call to the other as often as
you want using the Hold button.
To alternate between two connections, proceed as follows:
The alternating connections can be ended in a number of
ways:
Call No. 1
P
You are talking to Caller No. 1.
R
Press the Hold button. Call No. 1 is now on hold.
M
To dial a second call, simply dial either the desired
extension number or the outside line access “0” fol-
lowed by the desired external number.
Call No. 2
P
If the call is answered, you can consult on this line.
The original caller is still on hold.
R2
To switch back from Call No. 2 to Call No. 1, dial the
sequence shown at left.
Call No. 1
P
Call No. 1 is now active again and Call No. 2 is on
hold.
R2
To switch back again from Call No. 2 to Call No. 1,
dial the same sequence. In this way you can alter-
nate between the two connections.
O
The caller on hold hangs up. You can continue talking
on the active connection.
R1
You end the active connection by dialing the se-
quence shown at left. The call that was on hold is
now active again, and there is no call left on hold.
O
K
Call
P
You can also return to the call on hold by hanging up
the handset: this ends the currently active connec-
tion. In this case the phone rings as soon as you
hang up. Pick up the handset again to return to the
last call that was on hold.
VoIPon www.voipon.co.uk [email protected] Tel: +44 (0)1245 808195 Fax: +44 (0)1245 600030
