VYPER
™
VARIABLE SPEED DRIVE
OPERATION
100-210 IOM (
JUL
09)
Page 40
PROGRAMMING VYPER™ / QUANTUM™Lx
COMMUNICATIONS
Step 1:
(See Figure 39) The communication rate between
the Vyper
™
and the Quantum
™
LX requires programming.
Advance to the Communications Screen by pressing the
[
MENU
] key and then selecting “
Setpoints
” and “
Commu-
nications
”.
Step 2:
(See Figure 39) Use the cursor arrow and [
Tab
] keys
to navigate between setpoints. Use the keypad to program
the parameters listed in Table 12 under “Comm1” (Callout
1) at the Communications Screen. Press the [
Enter
] key to
accept each setpoint.
Step 3:
Press the [
Submit
] key to accept the changes to
Comm1 and return to the operating status screen.
Figure 39 - Communications Screen
1
Comm 1 Parameter
Setpoint
Baud Rate
19200
Data Bits
8
Stop Bits
1
Parity
None
RS-485 Connection
No
Protocol
Vyper
Map File
No
Table 12 – Comm1 Setpoints
