PROGRAMMING INSTRUCTIONS
Page 20
Service Manual TDR8 P Gas form 9124023 rev. 01/2022
TDR-P
eco
Models
EN
34 / 48
10 Step 1
Temp 215 °C Time 21 -
10 Step 1
Temp 215 °C Time 210
10 Step 1
Temp 215 °C Time 210
10 Step 2
Temp 215 °C
10 Holding
Temp 85 °C Time 999
32. Press the OK button to confirm.
33. Set the second digit.
34. Press the OK button to confirm.
35. Set the last digit.
36. Press the OK button to confirm.
37. The Step is now completed.
Select the right arrow and press the
OK button to go to the next step.
Select the left arrow button and press
the OK button to go back to the last
setting.
Select the
and press the OK
button to finish programming.
38. Program the next step (when
required). See step 1 for the
procedure.
39. After step 3 or when entering no time
at step 2 (or 3) the holding step will
appear. Set the temperature and time
as required.
Note:
Set the time to 999 for continuous
operating.
Only available when activated (refer
to section 6.3).
