Fri-Jado STG 5-I Instructions Manual Download | Manualshive

Page: 5 / 48

background image

5

Installation, Operation and Care of

STG - ROTISSERIE OVEN MODELS AND

STW – WARMER MODELS

BEFORE USING THE OVEN OR WARMER FOR THE FIRST TIME,

CAREFULLY READ THIS ENTIRE MANUAL.

IMPORTANT NOTICE: The user is responsible for reading and following
these instructions to ensure the safe and proper installation, operation,
and maintenance of the ovens and warmers. The manufacturer
expressly disclaims any and all liability for any and all damage or injury
resulting from failure to follow and comply with these instructions, or
from failure to exercise reasonable care in the handling, operation,
cleaning, and repair of the ovens and warmers, and failure to explicitly
include any warnings or instructions in this manual shall not give rise to
any claim for damages. If you have any questions concerning the
installation, operation, care, or maintenance of the ovens or warmers
that are not covered by these instructions, please contact the
manufacturer at:

Fri-Jado Inc.

877 – 374 – 5236

(toll free)

SAFETY SYMBOLS

The following symbols are used throughout this manual to alert the user to specific
hazards:

= WARNING

Failure to observe this warning may result in personal injury, death, or
equipment damage.

= WARNING

Risk of electrical shock. Failure to observe this warning may result in
personal injury, death, or equipment damage.

= WARNING

Hot! Risk of burns. Wear heat-protective gloves.

Please read the safety instructions in this manual carefully and use the ovens
and warmers only as described in these instructions to avoid injury or damage.

KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE!

© 2008 Fri-Jado BV, Etten-Leur, The Netherlands
Customers are permitted to copy these instructions for private use.

«
...
3
4
5
6
7
...
»

Summary of Contents for STG 5-I

















































Reviews:

No comments

Related manuals for STG 5-I

Brand: FASTERHOLT Pages: 96

Brand: H-TEC Education Pages: 16

Brand: H-TEC Education Pages: 12

Brand: Wassermann Pages: 24

Brand: Bartscher Pages: 20

Brand: Bartscher Pages: 24

Brand: H&S Pages: 32

PowerGen 5650 Series

Brand: Qnergy Pages: 10

Brand: Twiflex Pages: 5

R100 Swell Series

Brand: WAVEFIT Pages: 30

Brand: ABB Pages: 106

Brand: Landoll Pages: 144

Brand: Castellini Pages: 299

Brand: Lowenstein Medical Pages: 457

GrainLogix XLB10

Brand: LOFTNESS Pages: 104

CardioCare EKG2000

Brand: Bionet Pages: 70

Egatronik 51249

Brand: Ega Master Pages: 22

BTL7-P511-M-P-S32/KA Series

Brand: Balluff Pages: 16

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands