manualshive.com logo in svg

Fri-Jado Cold MCC, Service Manual

Share
Download
Fri-Jado Cold MCC Service Manual Download Page 49

 Rev 3 Service Manual MCC Hot / Cold 2021

Page 49 

8.0

 Operation MCC Hot 

8.0  Hot Units

  

 

 

The display value is not 

 

 

the product temperature!

 

 

When switched on, the display performs a lamp test; the 

 

 

display and LED’s will flash for several seconds to check

 

 

all function are working correctly.

8.0.1  Control Panel 

 

 

On/Off Switches (hot unit).   

 

  

      

 

 

 

Heating 

 

Lighting

8.0.2  Factory settings

  

 

The unit is set at 65 ºC (149 ºF) intake air temperature. 

 

 

If required this temperature can be adjusted to some degree.

  

 

 

At a ambient temperature of 20 ºC (68 ºF) and an initial core temperature of 85 ºC (185 ºF)  

 

 

the factory settings of the unit’s temperature ensure a constant core temperature of at 

 

 

least 63 ºC (145.5 ºF) for 4 hours. 

Summary of Contents for Cold MCC




















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands