Freetech P6F128 Manual Download Page 9

Page: 9 / 64

P6F128 Quick Reference

1.5. PCI and AGP Frequency Settings

The PCI and AGP frequency settings are automatically set by the
system.

1.6. Connectors

COM2

Serial Port Connector:

This 10-pin header is used to connect a

serial port extension bracket for adding a second serial port to your
system.

CPU FAN

CPU FAN Connector:

This 3 -pin header is used for connecting

the CPU fan.

LCD/DVI Connector:

This 20-pin header is used for attaching a

flat panel DVI or LCD monitor. (Optional)

JP1

TV Audio-out Connector:

This 3 -pin header is used for

connecting TV audio. (Optional)

JP4

TV out Connector:

This 8 -pin header is used to connect a TV

lineout. (Optional)

Infrared (IR) Connector:

This 5 -pin header is used to connect an

infrared (IR) port for use of IR devices.

CD1/2

CD Connectors:

These 4 -pin headers are used for connecting the

CD ROM audio input to the sound card.

AUX

Auxiliary Connector:

This 4 -pin header is an auxiliary input

connector.

WOL

Wake On LAN Connector:

This 3 -pin header is used for remote

wake up of the computer through a network card.

USB (2)

USB Connector:

This 8 -pin header is used for connecting front

panel USB ports 3 and 4.

SYS FAN

System Fan Connector:

This 3 -pin header is for connecting the

case fan that keeps the system cool.

1.7. LEDs

Red

The red indicator LED1 lights up when the system enters suspend
to DRAM mode.

Summary of Contents for P6F128

































































Search results

Summary of Contents for P6F128

Reviews:

Brands by name

Popular brands

Freetech P6F128, Manual

Search results

Summary of Contents for P6F128

Reviews:

Brands by name

Popular brands