46
Mainboard User’s Manual
MODEM Use IRQ:
If you want an incoming call on a modem to
automatically resume the system from a power-saving mode, use this
item to specify the interrupt request line (IRQ) that is used by the modem.
You might have to connect the fax/modem to a mainboard Wake On
Modem connector for this feature to work. Options are:
—
3 (default)
—
4
—
5
—
7
—
9
—
10
—
11
—
NA
Suspend Mode:
The CPU clock will be stopped and the video signal will
be suspended if no Power Management events occur for a specified
length of time. Full power function will return when a Power
Management event is detected. Options are from “1 Min” to “1 Hour” and
“Disable.” The default is “Disable.”
HDD Power Down:
The IDE hard drive will spin down if it is not
accessed within a specified length of time. Options are from “1 Min” to
“15 Min” and “Disable.” The default is “Disable.”
Soft-Off by PWRBTN:
When set to “Instant-Off” (default), pressing the
power button will turn off the system power. When set to “Delay 4 Sec”
you have to press the power button and hold it for more than 4 seconds
to turn off the system power. Otherwise, the system just goes into
suspend mode. The options are “Instant-Off” and “Delay 4 Sec.”
Wake -Up by LAN:
When set to “Enabled”, the system power will be
turned on if the LAN port receives an incoming signal. Default setting is
“Disabled.”
Power On by Ring:
When set to “Enabled,” any activity on the Modem
port will wake up the system from a power saving mode. The options
are “Disabled” and “Enabled” (default).
