manualshive.com logo in svg

Freetech P6F128, Manual

Share
Download
Freetech P6F128 Manual Download Page 61

55 

5. Driver and Utility 

 

5.1. Flash Utility 

 

The BIOS of the P6F128 mainboard can be upgraded by using a Flash 
utility.  A new version of the BIOS can be downloaded from the factory's 
BBS and Web site.  The system BIOS is stored in a 1 M-bit Flash 
EEPROM that can be erased and reprogrammed by the Flash utility. 

 

There are two files in the FLASH directory: 

 

—

 

FLASH.EXE Flash utility for AWARD BIOS upgrade 

 

—

 

README.TXT Text file of instructions 

 

The Flash utility will not work with any memory manager software 
running in the system.  In order to make sure no memory manager 
software is running, boot your system from a bootable floppy diskette 
which does not contain CONFIG.SYS and AUTOEXEC.BAT files.  If you 
are using MS-DOS 6.x, you can press the <F5> function key when the 
“Starting MS-DOS..” message appears on the screen to bypass the 
CONFIG.SYS and AUTOEXEC.BAT. 

 
 

Summary of Contents for P6F128

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands