49
BIOS Configuration
Resources Controlled By:
The default setting is “Manual” which allows
you to control IRQs and DMAs individually. The other option is “Auto”
which will detect the system resources and automatically assign the
relative IRQs and DMAs for each peripheral.
IRQ Resources:
These fields only become available if the Resources
Controlled By field is set to “Manual”. If there is a legacy ISA device,
which uses an IRQ or a DMA, set the corresponding IRQ or DMA to
“Legacy ISA”; otherwise, you should set this field to “PCI/ISA PnP.”
PCI/VGA Palette Snoop:
This item is designed to overcome some
problems that can be caused by some non-standard VGA cards. This
board includes a built-in VGA system that does not require palette
snooping so you must leave this item disabled.
INT Pin 1/2/3/4 Assignment:
Names the interrupt request (IRQ) line
assigned to PCI 1 to PCI 4 on your system. Activity of the selected PCI
slot awakens the system.
After you have made your selections in the PNP/PCI Configuration Setup,
press the <ESC> key to go back to the main program screen.
4.8. PC Health Status Option
On mainboards that support hardware monitoring, this item lets you
monitor the parameters for critical voltages, critical temperatures, and fan
speeds.
Selecting “PC Health Status” on the main program screen displays this
menu:
