32
Mainboard User’s Manual
CMOS Setup Utility – Copyright © 1984 – 2000 Award Software
IDE Primary Master
Item Help
IDE HDD Auto-Detection
IDE Primary Master
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
[Press Enter]
[Auto]
[Auto]
0 MB
0
0
0
0
0
Menu Level
uu
To auto-detect the
HDD size, head . . . on
this channel
£¤¢¡
: Move Enter: Select +/-/PU/PD: Value F10: Save Esc : Exit
F1: General Help F5: Previous Values F6 : Fail-Safe Defaults
F7: Optimized Defaults
IDD HDD Auto-Detection:
Press <Enter> while this item is high-lighted
if you want the Setup Utility to automatically detect and configure a hard
disk drive on the IDE channel.
If your system has an IDE hard drive, you can use this utility to detect
its parameters and enter them into the Standard CMOS Setup
automatically.
If the auto-detected parameters displayed do not match the ones that
should be used for your hard drive, do not accept them. Press the
<N> key to reject the values and enter the correct ones manually in
the Standard CMOS Setup screen.
Note: If you are setting up a new hard disk drive that supports
LBA mode, more than one line will appear in the parameter
box. Choose the line that lists
LBA
for an LBA drive.
Do not choose “Large” or “Normal” if the hard disk drive is already fully
formatted when you installed it. Select the mode that was used to
format it.
