manualshive.com logo in svg

Freetech P6F128, Manual

Share
Download
Freetech P6F128 Manual Download Page 64

58 

Mainboard User’s Manual 

 

2. Click Driver Install. 
3. Select the folder 815 AGP driver for WIN98, WIN2000/WIN95/WINNT 
to start the installation: 

 

 

 

4. Follow the instructions on the screen to complete the installation.  
After setup is completed, you need to restart the computer. 

 
 
 

5.5. Online Services 

Flexus Computer Technology, under the Freetech brand name, has 
consistently won recognition for excellence in the design and 
manufacturing of high quality mainboards! 

 

Our products are globally recognized among the leading cost 
performance mainboards in the industry today and we are a certified 
ISO-9002 manufacturer! 

 

Our customers are our partners! Flexus practices partnership service 
“not customer service”! Our attention to partnership service is aggressive 
and proactive, by using our global partnership service system. We create 
value for our partners in the high-end market and we are always ready to 
see to our partners’ requirements, because at Flexus, we believe our 
partners’ success is our success! 

 

If you need technical support, information on products, or updated 
versions of the BIOS, drivers and utilities access the Internet and point 
your browser to: 

 

www.freetech.com

 

 
 
 

Summary of Contents for P6F128

































































Reviews:

No comments

Brands by name

Popular brands

Load more brands