21
MAINTENANCE INSTRUCTIONS
CLEANING
WARNING: Always unplug your treadmill prior to cleaning or servicing your unit, in order to avoid
electrical hazard or shock.
Care has been taken to assure that your treadmill has been properly adjusted and lubricated at the factory. It is not
recommended that the user attempt service on the internal components instead seek service from an authorized
service center. However, from time-to-time the outer surfaces may appear dull or dirty, following the instructions
listed below will restore and preserve the original finish.
Cleaning metal surfaces may be accomplished by using a soft cotton or terry cloth rag with a light application of
car wax. Do not use aerosol sprays or pump bottles as they may deposit wax upon the walking or computer
surface.
Under no circumstances are you to use ammonia, oils, silicones or any other compounds on the rubberized walking
surface. The use of such materials may cause serious injury to the body and/or deteriorate the performance of the
walking surface. Only clean the rubberized walking surface with a damp cloth (water only).
From time-to-time the computer surface may collect dust or finger prints. The use of harsh chemicals ill destroy
the protective coating and cause a static build up that will damage the components. This surface may be cleaned
with specially prepared chemicals found in most computer supply stores especially made for anti-static surfaces. It
is strongly recommended that you purchase such a cleaning compound.
At least once a year remove the motor cover and vacuum under the motor cover.
Warning: Always unplug the
treadmill from the electrical outlet before removing the motor cover.
