23
WARNING: Always unplug your treadmill prior to cleaning or servicing your unit, in order to avoid
electrical hazard or shock.
RESET SWITCH RESETTING
If your treadmill looses power or will not start, check the reset switch located on the front of the motor cover.
If the white tab of the reset switch is not showing then the reset switch has not been tripped.
If the white tab of the reset switch is showing, the reset switch has tripped.
To reset the reset switch:
Remove the safety clip on console.
Press white tab of the reset switch in until it snaps back into place.
If the reset switch continues to trip - see treadbelt adjustment and treadbelt lubrication
FUSE REPLACEMENT
If your treadmill looses power or will not start, check the fuse located on the motor controller or the incline
controller.
DANGER: Turn the power switch off and unplug the treadmill to reduce the risk of an electric shock
Remove the motor cover
Remove and replace the fuse on the motor controller
Replace the motor cover
SPEED SENSOR ADJUSTMENT
If the monitor does not display speed or distance the speed sensor and magnet may be misaligned. Follow these
step to check and realign.
Remove the motor cover
Check the spacing and alignment between the magnet on the right side of the front roller and the speed sensor on
the frame. The spacing must be 1/8”.
Loosened screw and slide speed sensor in or out of clamp.
Retighten screw
Replace the motor cover
