19
TROUBLE SHOOTING
Problem
Cause
Correction
Treadmill
will
not start
Treadmill
not
plugged
in
Plug into three prong (grounded) outlet
On / off switch not on
Push the on/off button to on
House
circuit
breaker
tripped
Reset
or
replace
Treadmill reset switch tripped
Reset treadmill reset switch see reset switch
resetting
Treadmill motor controller fuse or
incline controller fuse blown
Replace controller
Unit plugged into insufficient
extension cord
Plug directly into wall outlet
No display on monitor
On / off switch not on
Push on / off button to on
Safety key not on console
Place safety key on console
Error message
LS
Reed switch not aligned properly
See reed switch adjustment
Magnet damaged or missing from
front roller pulley
Replace magnet
Monitor
not
working
properly
Replace
monitor
Error message
E1
Monitor defective
Replace monitor
Error message
E2
Incline wiring not connected
properly
Reconnect incline wires
Incline wring damaged
Replace incline wires
Incline motor damaged
Replace incline motor
No pulse displayed on
monitor
Hands not on hand pulse
Place two hands on hand pulse
Hands on hand pulse
Replace hand pulse
Chest strap not positioned properly
Reposition chest strap
Batteries defective on chest strap
Replace battery
Treadmill stop or shuts off
by itself
House
circuit
breaker
tripped
Reset
or
replace
Treadmill
reset
switch
tripped
Reset
treadmill
reset
switch
Treadmill motor controller fuse
blown
Replace controller
Treadbelt does not run in
center
Treadbelt tension not even across
treadbelt
See treadbelt adjustment
Treadbelt slips
Treadbelt tension too loose
See treadbelt adjustment
Treadbelt hesitates while
being stepped on
Insufficient lubricant on treadbelt
See treadbelt lubrication
Black particles collecting
under treadmill
Drive belt is breaking in
Vacuum under treadmill periodically
NOTE:
It is not necessary to return treadmill for a monitor repair. The monitor or console is removable from the treadmill
for repair or replacement - see parts section
