Freedom9 freeGuard Slim 100, User Manual

Page: 154 / 170

R O U T I N G
1 0
10-2
User Guide
set route 10.0.100.0/24 gateway 10.0.0.100 interface eth0
save
GUI Example: Adding a Static Route
1.
Select Network > Routing Add
2.
Enter the following, then click Apply :
Network address: 10.0.100.0
Netmask: 24
Interface: etho0
Gateway: 10.0.0.100
Deleting Static Routes
Use the unset route command to delete a static route:
unset route {ip_addr/mask} }
Modifying Static Routes
To modify an existing static route, first delete the route and then add a new route entry with the
desired route changes.
Example: Modifying a Static Route
Modify the gateway on a previously created static route from 10.0.0.100 to 10.0.0.20:
unset route 10.0.100.0/24
set route 10.0.100.0/24 interface eth0 gateway 10.0.0.200
save
GUI Example: Modifying a Static Route
1.
Select Network > Routing
2.
Select the following, then click Apply :
Remove: 10.0.100.0
3.
Network > Routing Add
4.
Enter the following, then click Apply :
Network address: 10.0.200.0
Netmask: 24
Interface: etho0
Gateway: 10.0.0.100
Setting the Default Route
If a specific route for traffic is unknown to a server or a routing table, the default route forwards
all traffic to the default interface you define.