U S I N G S N M P
8
8-6
User Guide
•
System Contact—Sets the SNMP system contact.
GUI Example: Configure SNMP Settings
1.
Select Logging > SNMP
2.
Enter the following SNMP settings and click
Apply
:
Type System Name: SlimLine
Type System Contact: Jon Smith
Type System Location: Lab
Type Listen Port: 161
Type Trap Host: 162
3.
Select SNMP > Community >Edit
4.
Enter the following SNMP Community settings and click Apply:
Type Name: public
Type Host: 192.168.1.1
Enabling SNMP on a Specified Interface
To allow the SNMP monitoring system to contact and pull the SNMP information from the Freedom9
Network appliance, SNMP must be enabled on that specified interface.
set interface {interface name} manage snmp
Example: To enable SNMP on the eth0 interface
set interface eth0 manage snmp
GUI Example: To Enable SNMP On The Eth0 Interface
1.
Select Network > Interface > Edit (for ethernet0)
2.
Enter the following, then click Apply.
Manage option: SNMP
Example: To Disable SNMP on the eth0 Interface
unset interface eth0 manage snmp
GUI Example: TO Disable SNMP On the eth 0 Interface
1.
Select Network > Interface > Edit (for ethernet0)
2.
Enter the following, then click
Apply
.
Manage option: Uncheck SNMP
Summary of Contents for freeGuard Slim 100
