Freedom9 freeGuard Slim 100, User Manual

Page: 12 / 170

G E T T I N G S T A R T E D
1
1-2
User Guide
Document Conventions
This section explains the Command Line Interface (CLI), the browser based graphical user
interface (WebGUI), and the illustration conventions used in this guide.
Some general documentation conventions include:
Document and Command Line Interface (CLI) Conventions
The following conventions are used when presenting the syntax of the command line interface
(CLI):
• References to MOS refer to the Freedom9 firmware
• Values inside square brackets [ ] are optional.
• Values inside braces { } are required.
• For commands that require a selection from a pre-defined list of values, each value in the
list is separated by a pipe ( | ).
• Variables appear in italic.
• When a CLI command appears within the context of a sentence in this document, it is in
bold (except for variables, which are always in italic). For example: “Use the get system
command to display general information about the Freedom9 Network appliance.”
Variable CLI values are described in Table 1-1 .
Table 1-1 Variable CLI Values Used in This Guide
Browser-Based Graphical User Interface (WebGUI) Conventions
• Values inside square brackets [ ] are optional.
• Values inside braces { } are required.
• For commands that require a selection from a pre-defined list of values, each value in the
list is separated by a pipe ( | ).
• Variables appear in italic.
Variable CLI V alue Description
addr_str Defines an IP address range assignment
dst_adr Destination address assigned in a policy
fqdn Fully Qualified Domain Name
ip_addr Defines an IP address assignment
number Numeric value assigned for a specific command
name_str Name value assignment
password_str New password assignment is required
src_adr Source address assigned in a policy
srvc Service assigned in a policy
zone name Zone used in a specific command