manualshive.com logo in svg

Freedom9 freeGuard Slim 100, User Manual, Page: 79 / 170

Share
Download
Freedom9 freeGuard Slim 100 User Manual Download Page 79

. . . . .

T R A F F I C   F L O W   R E P O R T I N G

 User Guide

5-21

Error

Message

<name> is not connected

Meaning

The system was unable to connect to another process, most likely the configuration agent.

Message

Fail to connect to ifmgr

Meaning

The attempt to get the connection id for the IF manager while disabling PPP/PPPoE failed. A 
similar error message exists while enabling PPP/PPPoE however it is a WARNING instead of 
an ERROR

Message

Fatal error <string>

Meaning

An error has occurred and the PPP/PPPoE link is being torn down

Message

Failed to create PPPoE socket

Meaning

Unable to create the socket for use by the PPP/PPPoE module.

Message

Failed to connect PPPoE socket <errno>

Meaning

Unable to connect to the socket used by the PPP/PPPoE module

Message

Out of memory in timeout()!

Meaning

Unable to allocate a structure for use in the timeout routine

Message

Failed to get time of day

Meaning

Unable to get the time of day while determining what timeout routines should be invoked.

Message

Bogus PPPoE length filed <length>

Meaning

The number of bytes received is less than the length indicated in the packet

Warning

Message

Error in disable spu traffic

Meaning

Unable to write to SPU location to disable PPP/PPPoE processing on the SPU

Message

Fail to send ppp disable event to ifmgr

Meaning

Unable to send IPC message from PPP/PPPoE module to if manager when disabling 
PPP/PPPoe

Message

Conn undefined

Meaning

Connection structure not defined when attempting to insert PPP/PPPoE information into inter-
face

Message

Fail to connect to ifmgr

Summary of Contents for freeGuard Slim 100











































































































































































Reviews:

No comments