Freedom9 freeGuard Slim 100, User Manual

Page: 114 / 170

M O N I T O R I N G T R A F F I C
7
7-8
User Guide
Initializing th e Appliance
Use the following commands in Table 7-7 to initialize the appliance, making it
transparent to the rest of the network. For more information about CLI commands, see the CLI
Command Reference Guide provided with your appliance.
Table 7-7: Commands to Initialize the Appliance
Setting Up the NetFlow Infrastructure
Use the following commands to set up the NetFlow infrastructure. For more information about CLI
commands, see the CLI Command Reference Guide provided with your
appliance.
Table 7-8: Commands to Set Up NetFlow Infrastructure
Command Description
unset interface eth0 ip Unbinds the IP address from the eth0
interface. This is a pre-requisite for
transparent mode.
set address "trust" "webserver"
192.168.65.149/32
Creates the address object “webserver” in
the trust zone. This setting should be your
address server.
unset interface eth0 manage http Required command to set transparent
mode.
set interface eth0 transparent Sets eth0 interface in transparent mode.
set interface eth0 zone trust Assigns eth0 to the trust zone.
set interface eth1 transparent Sets eth1 interface in transparent mode.
set interface eth1 zone untrust Assigns eth1 to the untrust zone.
set interface br0 ip 192.168.65.31/24 Assigns an IP address to the management
interface.
set interface br0 manage http Enables web management on the
management interface.
Command Description
Set netflow enable Enables NetFlow functionality.
Set netflow bandwidth 500 Sets the maximum export bandwidth for
Netflow to 500 K bytes per second.
set netflow collector 192.168.1.10 port
9995
Sets the netflow collector at 192.168.1.10
and the network records to be generated
on port 9995.
This setting should include your port and
server address.
[NOTE]
The netflow collector must also be
configured to listen to this port.