Freedom9 freeGuard Slim 100, User Manual

Page: 138 / 170

S E C U R I T Y Z O N E S A N D I N T E R F A C E S
9
9-4
User Guide
Example: Deleting the “Sales” Security Zone
unset zone sales
save
GUI Example: Deleting the “Sales” Security Zone
1.
Network > Zone.
2.
Remove the following zone then click Apply :
Zone Name: Sales
[NOTE]
If a security zone is bound to an interface, you cannot delete the zone until you unbind it from the
interface. For information about interface commands, refer to Configuring Interfaces and Subinterfaces .
Viewing Zone Configurations
Use the get zone command to display information on all security zones. The following information
appears for each zone:
• Zone name—The name assigned to the interface.
• Zone ID—The ID number assigned to the zone.
• Type—The security settings on the zone.
• Interfaces bound—Lists all physical and logical interfaces bound to the zone.
Use the get zone command to display information on a specific zone:
get zone {interface name}
Use the get zone all command to display information on all zones:
get zone all
Figure 9-5 shows an example of the get zone command.
Figure 9-5 Get Zone Command Example