Franzis 10013347, Building Instructions

Page: 60 / 61

EMPREINTE
/ IMPRINT
Tous droits réservés, y compris ceux de reproduction
photomécanique et de stockage dans les médias
électroniques. La création et la diffusion de copies sur papier,
sur des supports de données ou sur Internet, notamment en
format PDF, ne sont autorisées qu'avec l'accord exprès de
l'éditeur et feront l'objet de poursuites.
La plupart des désignations de produits ainsi que des noms et
logos d'entreprises mentionnés dans cet ouvrage sont
généralement aussi des marques déposées et doivent être
considérées comme telles. L'éditeur suit l'orthographe des
fabricants dans les descriptions des produits.
Toutes les instructions et les conseils de construction
présentés dans ce livre ont été élaborés, vérifiés et testés avec
le plus grand soin. Néanmoins, des erreurs dans le livre et le
kit ne peuvent être totalement exclues. L'éditeur et l'auteur
sont responsables en cas d'intention ou de négligence grave
conformément aux dispositions légales. Au demeurant,
l'éditeur et l'auteur ne sont responsables, en vertu de la loi sur
la responsabilité du fait des produits, que des atteintes à la vie,
au corps ou à la santé ou de la violation coupable d'obligations
contractuelles importantes. La demande de dommages-intérêts
pour la violation d'obligations contractuelles essentielles est
limitée au dommage prévisible et typique du contrat, sauf s'il
existe un cas de responsabilité obligatoire en vertu de la loi
sur la responsabilité du fait des produits.
All rights reserved, including those of reprinting, reproduction and
storage in electronical media. No part may be reproduced and dis-
tributed on paper, on storage media, or in the internet, especially as
PDF, without the publisher´s prior written permission. Any attempt
may be prosecuted.
As a general rule, most of the product names, company names and
company logos used in this book are registered trademarks and
have to be treated as such. In general, the publishing company uses
the spelling of the respective producers.
All assembly instructions and tips in this book have been deve loped,
verified and tested with utmost care. However, errors in the book
and in the assembly kit cannot be ruled out. According to appli-
cable laws, the publishing company and the author can be held re-
sponsible only in the case of intent or gross negligence. According
to the Product Liability Act, publishing company and author are only
liable for loss of life, physical injuries and damages to health or in
the case of culpable violations of essential contractual obligations.
The claim for damages due to violations of essential contractual
obligations is limited to foreseeable damages typically associated
with publishing houses, except in the case of mandatory liability
according to the Product Liability Act.
Please retain this information for future reference
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions:
1) this device may not cause harmful interference,
2) this device must accept any interference received, including
interference that may cause undesired operation.
Caution:
Changes or modifications not expressly approved by the
party responsible for compliance could void the user´s authority to
operate the equipment.
Note:
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the inst-
ructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interfe-
rence to radio or television reception, which can be determined by
turning the equipment off and an, the user is encouraged to try to
correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver ís connected.
• Consult the dealer or an experienced radio/TV technician
for help.
119