Franklin Fueling Systems KWIK TRIP EVO 5000 Page 71 Installation And Application Manual Download

Page: 71 / 84

Pump Shutdown

Red, if pump is shutdown. Gray, if not shutdown

Alarm

Red, if in alarm. Gray, if not in alarm

Running Gross Leak Test

Green, if running test. Gray, if not running test

Running Monthly Leak Test

Green, if running test. Gray, if not running test

Running Annual Leak Test

Green, if running test. Gray, if not running test

Between Test

Green, if running test. Gray, if not running test

Waiting out Thermal

Green, if waiting out thermal, Gray, if not

Transducer Failure

Red, if the LS-500 is not communicating with the

transducer

Pump On

Green, if the STP is on

Pump Request

The LS-500 is attempting to turn the STP on

When viewing the Line Status Summary screen, remember to enable

Auto Refresh

. The Auto

Refresh

button will allow the on-screen results to be automatically updated. The screen update

depends on the user-defined parameter

Refresh Rate

found

on the Configuration page.

The Line Control screen will automatically update line information. Administrator privileges will
be necessary to use the Line Control screen. For instructions on FMS programming or on how to
obtain an Administrator access level, please refer to the

Fuel Management System Programming

Guide T5 Series

(000-2142).

LS500 control screen

Status section

Indicator

Description

Line Pressure

Indicates the current line pressure

Enabled

Green, enabled. Red, disabled

Not Learned

Red, if not learned. Gray, if learned

Pump On

Green, if the STP is on

Alarm

Red, if in alarm. Gray, if not in alarm

Summary of Contents for KWIK TRIP EVO 5000





















































































Search results

Summary of Contents for KWIK TRIP EVO 5000

Reviews:

Related manuals for KWIK TRIP EVO 5000

Brands by name

Popular brands

Franklin Fueling Systems KWIK TRIP EVO 5000, Installation And Application Manual

Search results

Summary of Contents for KWIK TRIP EVO 5000

Reviews:

Related manuals for KWIK TRIP EVO 5000

Brands by name

Popular brands