manualshive.com logo in svg

Franklin Fueling Systems KWIK TRIP EVO 5000, Installation And Application Manual

Share
Download
Franklin Fueling Systems KWIK TRIP EVO 5000 Installation And Application Manual Download Page 33

27

System Setup and Programming 

Parameters

Use the following programming parameters to set up T5 Series ATGs at Kwik Trip

TM

 retail fueling 

facilities. Refer to the 

T5 Series Fuel Management System Installation Guide

 (000-2150) for 

complete setup instructions. 

NOTE:

 System setup must be performed by a certified FFS service contractor.

Set up the DNS Server and Protocol Settings with the site’s specific DNS sever addresses. These 
are set up at the ATG level (Setup/Configuration) except the Veeder-Root Port, which you can find 
at: Setup/Parameters/Communications/Protocols/Veeder-Root Port.

Group Name

Parameter Name

Parameter Value

DNS Server Address

Preferred DNS Server

10.3.10.11

Alternate DNS Server

10.3.10.12

Protocol Settings 

Veeder-Root Port

10001

Web Server Secondary Port

8001

System ID

The following screens are accessed at the Setup screen:

Group Name

Parameter Name

Parameter Value

System ID

Site Name

Site # *

Web UI URL

 IP address of the system (for reference only)

ID Line 1

ID Line 2

ID Line 3

ID Line 4

ATG Serial #

ID Line 5

Not used

* The Site Name field must ONLY have the 3-digit store number and no additional characters.

Summary of Contents for KWIK TRIP EVO 5000





















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands