Franklin Electric SUBDRIVE UTILITY, Owner'S Manual

Page: 11 / 132

INSTALLATION AND SETUP
Installation Process
11
INSTALLATION AND SETUP
Installation Process
Refer to the following table when planning installation of the SubDrive Utility.
1 2 3 4 5 6
Plan System
Goals Identify
Options Select Control
Methods Install VFD
Hardware Install Wiring Program
Parameters
Intended Function
Hardware
Application
Automation
Protection
Pressure Feed-
back Type
Potentiometer
Location
Climate control
Distance
Measurements
Conduit
High Voltage
Control circuits
Basic
I/O setup
Option settings
1. The planned usage of the overall system will determine which options and control methods
are appropriate, as well as how the VFD should be installed and programmed. Refer to the fol-
lowing pages for examples of how the system might be used.
2. System options define and automate features that support the intended operation. These fea-
tures may require specialized control methods and programming. For more details, refer to
“Drive Configuration” on page 24 , and “Performance Settings” on page 27 .
3. The SubDrive Utility supports several methods for automating pump motor speed control.
Refer to “Drive Configuration” on page 24 for possible control setups.
4. The overall function of the system directly affects where and how the VFD should be mounted.
Refer to “Physical Installation” on page 16 for guidelines.
5. The selected motor application, along with the control method(s), determines how the VFD
should be connected. Refer to “Electrical Installation” on page 18 for more information.
6. The VFD can be quickly and easily programmed for most standard operations. Refer to “Drive
Configuration” on page 24 . Advanced features or options may require additional adjustments
to achieve the desired performance. Refer to “Performance Settings” on page 27 .
• Constant
pressure water
systems
• Pressure
Boosting
• Submersible
• Surface pump
• Bump mode
• Steady Flow
• Drawdown
• Overload
• Underload
• Motor Ground
Fault
• Drive
Temperature
• Transducer
• Pressure Sensor
• Setpoint value
• Underload
Sensitivity
• Inside
• Outside
• Temperature
• Moisture
• Wire sizes
• Filtering
requirements
• Clearance
• Drilling
• Routing
• Separation
• Grounding
• Inputs
• Outputs
• Feedback
inputs
• Application
• Motor ratings
• Setpoints
• Input functions
• Enable features