Franklin Electric SUBDRIVE UTILITY, Owner'S Manual

Page: 39 / 132

SPECIFICATIONS
Common Specifications
39
SPECIFICATIONS
Common Specifications
* Operating temperature is specified at full output power when installed as recommended. Refer to
“Over Temperature Foldback” on page 30
.
** Shelf life can be extended for one year by powering the drive for 60 minutes with no load.
SubDrive Utility
Model
NEMA 3R
(indoor/outdoor) 5870202003 with Pressure Sensor
5870202003XC with Pressure Transducer
Input from
Power Source
Voltage 115/230 ± 10% VAC
Phase In Single-Phase
Frequency 60 Hz
Current (max) 20 A
Power Factor ~ 0.52
Power (idle) 3 Watts
Power (max) 2.5 kW
Wire Gauge Size(s) Refer to “Fuse/Circuit Breaker and Wire Sizing” on page 19 .
Output to Motor
Voltage 230 VAC Maximum
Phase Out Single-Phase (2-Wire)
Frequency Range
35 – 63 Hz Submersible
40 – 63 Hz Surface
Current (max) 13.1 A (based on motor SFA)
Wire Gage Size(s) Refer to “Maximum Motor Cable Length” on page 20 .
Pressure
Setting
Factory Preset 50 psi (3.4 bar)
Adjustment Range
Pressure Sensor: 25-80 psi (1.7-5.5 bar)
Transducer: 5-95% of transducer range
Operating
Conditions*
Temperature
(at 230 VAC input)
–13 °F to 122 °F (–25 °C to 50 °C)
Relative Humidity 20-95%, non-condensing
Storage**
Temperature –13 °F to 149 °F (–25 °C to 65 °C)
Shelf Life 1.5 Years
Dimensions
and Weight
NEMA 3R
9-3/4” x 16-3/4” x 5-1/4” : 20 lbs
(25 x 42.5 x 13 cm) : (9 kg)
Recommended
For Use With
FE 115 VAC Motors
244502 - series (1/3 hp, 0.25 kW) single-phase, 2-Wire
244504 - series (1/2 hp, 0.37 kW) single-phase, 2-Wire
FE 230 VAC Motors
244505 - series (1/2 hp, 0.37 kW) single-phase, 2-Wire
244507 - series (3/4 hp, 0.55 kW) single-phase, 2-Wire
244508 - series (1.0 hp, 0.75 kW) single-phase, 2-Wire
244502 - series (1.5 hp, 1.1 kW) single-phase, 2-Wire
Other FE Pump and
Motor assemblies
MH, BT4, VR, DDS, VersaJet, C1