F3D3
Series
Service Manual Troubleshooting Guide / Section 1.3
Questions? Call Franke Technical Support Group For Your Area. Copyright
2012 Franke, Inc. All rights reserved.
NO!
Go to Question 6!
The Question!
Answer!
What To Check or Do
6. Can you simulate
a load by pulling
down on the
product door frame
while it is running
the door?
NO!
Check Load Cell calibration per
Section 1.9
instructions. OK? Yes
= Continue
No = Replace Load Cell per
Section 2.10
Yes!
Go to Question 7!
7. Can you
dispense a load by
pushing the bump
switch?
NO!
Does Control Panel indicate
Load Ready
? Yes = Continue
No =
Press and hold LANE OFF/ON button for four seconds. Did
Ready
appear in display and basket lights come on within 20 seconds?
Yes = Continue
No = reassemble Hopper, Drum & Baffle
Check wiring harness from Bump Switch to PC Control Board OK?
Yes =Continue
No = connect or replace harness.
Contact
Franke Technical Support
for P/N & Instructions
Check Bump Switch. OK? Yes = Continue
No = Replace
Basket Fill Plunger Switch per
Section 2.13
Yes!
The darn thing works. Don’t bother us!
Rev. 1 6/2012
