27
ENGLISH
4. Conversion of adjacent channels
It is possible to convert all filtered channels within the UHF band into a free channel under distribution.
So to not worsen the quality of the terrestrial digital channels managed by the SAF-HD headend, we rec-
ommend that you don’t convert them into output adjacent channels. To improve the signal, in the event
of a conversion into adjacent channels, we recommend taking advantage of the output channel OFFSET.
Note: No degradation will occur if the adjacent multiplexes present in the antenna are filtered on the same output
channels or if they are interspersed with at least one channel during the conversion phase.
5. PROGRAMMING INSTRUCTIONS
The SAF-HD headend can be programmed by an integrated keyboard or FHM software. To program the
headend by the FHM management software, refer to the FHM guide.
To enter the programming menu, press the key
and enter the user code (default 1234).
To change the language of the menu, enter the “HEADEND - LANGUAGE” menu of the SAF-HD unit and
select the language you want by pressing the
key.
For all programming operations and for interpreting the programming menus indicated in the following flow-
charts, refer to the following legend:
Keypad
Key Function
or
To confirm an entered value or to select a menu/submenu
or
To cancel an entered value or exit a menu
To scroll through menu items
Used to modify the parameters
To enter values
To save the modifications
S
......
9
WXYZ
0
➤
➤
➤
➤
✗
➤
✓
➤
➤
➤
NOTE: The set parameters are automatically saved when you exit the menu, even if you don’t press the
“Save” “
” key.
5.1 INITIAL MENU
see page
28
SETTINGS
COUNTRY
Country setting
FRACARRO
SAF-HD
SETTINGS
FILTERS
SETTINGS
RF EQUALIZE
SETTINGS
RF MAIN
SETTINGS
REMOTE POWER
Filters equalization
settings
Manual setting of gain
ON/OFF remote power on
INPUT 1-INPUT 2-INPUT 3
inputs
SETTINGS
FM LEVEL
SETTINGS
BIII/DAB LEVEL
SETTINGS
CONTROL UNIT
Setting the headend
parameters
EUROPE
FRANCE
UK
AUSTRALIA
FILTERS
<XXXXXXXXXX>
AUTO MANUAL
OFF
1dB
..
20dB
OFF
1dB
..
20dB
OFF
1dB
..
15dB
INPUT 1 ON/OFF
INPUT 2 ON/OFF
INPUT 3 ON/OFF
LANGUAGE
PIN
LCD CONTRAST
USB STORAGE
SERIAL SPEED
SOFTWARE VERSION
RESET DEFAULT
see page
28
see page
29
see page
30
see page
30
see page
30
see page
31
see page
32
Manual setting of
FM level
Manual setting of
BIII/DAB level
Filters and inputs
parameters settings
From the main menu you can access to 8 other settings:
COUNTRY Settings: allows the selection of the Country to set the corresponding canalization.
FILTER Settings: the principal functions of this menu include the definition and programming of UHF filters.
EQUALIZATION Settings: the function of this menu includes the manual or automatic settings of the gains of
UHF filtered channels.
Setting the FM LEVEL: the level of the FM band can be regulated from 0 to 20dB.
Setting the BIII/DAB LEVEL: the level of the III/DAB band can be regulated from 0 to 20dB.
Setting the FINAL GAIN: the function of this menu consists of programming the final gain to increase/decrease
the level of all signals.
Setting the REMOTE POWER SUPPLY: the function of this menu consists of managing the UHF input remote
power supply (in an independent manner).
Setting the HEADEND: the principal functions of this menu include the selection of the language, the manage-
ment of the access PIN, loading/saving a file from the USB pen drive and resetting the factory settings of the
SAF-HD unit.