5
English
3. INSTALLATION OF THE PRODUCT
3.1 PACKAGE CONTENTS
The packaging contains the following items:
• 3DG-4ASI-4T module
• Safety warnings and product
installation instructions.
3.2 MOUNTING THE MODULE
To avoid any injury, the product must be installed in a basket in accordance with the assembly instructions.
3.2 FIXING THE MODULE
Fix the module with the provided screws.
To guarantee correct operation of the modules and to ensure suitable shielding against radio interference,
it is necessary to fix the module with the provided screws.
4. INSTRUCTIONS FOR USE
1.
Insert the module in the central unit (which must be turned off).
2. Turn on the central unit and wait for initialisation (the Fracarro logo appears on the display).
3. Connect the antennal cables to the respective inputs.
4. To access the menu, press “√ ”, type in the user code (default 1234) and confirm by pressing “√”; the central
unit will perform a scan to find the connected modules. Begin programming using the PC or keypad and
integrated display in the control unit.
5. Check the output signal using a field meter.
6. Connect the distribution cable to the central unit output connector.
If required, the module can be reset to the factory default settings (see the control unit instructions).
ATTENTION: In this case the default language is English.
Carefully insert into the housing guide
Top screw
Lower screw