20
English
7 MONITORING
The central unit allows monitoring events and problems that could occur over time (e.g. no input signal, etc.).
A log can be created, a removable file or an email can be set with the list of anomalies or events.
To enable this function, enter the control unit programming page from “Home”, “Monitoring” and
“Configuration” to open the following screen:
In the “Monitoring settings” section (FIG 12) you must enable monitoring and you can enable saving the log list on
a local file, the time for file saving and enable sending an email with the alarm events.
In the second section, set the date and time for the control unit or automatically synchronise the date with a link
with an NTP server.
NOTE: to send the emails correctly the system date must be correctly set.
The last section is for the settings to send the emails: you must set the server and SMTP port, the email address
of the sender and receiver, the connection type and the name and password of the sender’s email.
Fig 12
