15
English
To use the USB functions, connect the USB drive to the 3DG-4ASI-4T module and enter the configuration
window of the USB from the status screen or using the menu CONFIGURATION -> INPUT -> USB (Fig.5)
Flag the ENABLE box to enable reading the USB drive.
Select the required file in SELECT FILE and click on SAVE to save the configuration.
If the file has never been used, the system analyses the file format and the bitrate used to perform an
automatic configuration, after which the system creates and saves a file in the USB drive with the same name
but an .FR extension, to make future use more fluid.
In the right section, the lock led should turn on green to show that the file is being successfully read. The
transport stream data are shown in the fields on the bottom right. During the pre-analysis, which can take a
few minutes, the USB status is “uploading”.
When a file is started and the “File OK” green led status is shown, the programs in the selected file are added
to the input programs list, and they can also be added to the output programs list.
6.6 OUTPUT MENU
Using the “OUTPUT” menu click on CONFIGURATION -> OUTPUT -> MUX 1 / MUX 2 / MUX 3 / MUX 4 to access the
Multiplex configuration page.
Fig 5
Fig 6
