![background image](http://html1.mh-extra.com/html/fpg/in-gnh03/in-gnh03_product-manual_2325954009.webp)
IN-GNH03/4/5/6/8
- 9 -
© Future Products Group
Controls
DROP-IN HEATED WELL ASSEMBLIES
-
OPERATION
Control Panel
A control panel, mounted on the joinery, provides for all
operational adjustments.
Temperature
Main On/Off Switch
Operating Mode
Indicator lights are also provided to show when the water level is
low and when the heating elements are on.
Temperature
The display normally shows the actual well
temperature.
To adjust the operating temperature, first press and
hold the left hand button for two seconds. Whilst
still pressing it, use the up or down arrow button to change the temperature
setting. Release both buttons to store the new temperature setting.
The display will now revert to showing the actual well temperature.
Operating
Mode
Rotate the mode switch to the appropriate position for the
required dish depth and type of operation.
65mm
– 100mm – 150mm – Steam – Dry
On/Off Switch
Rotate this switch to turn the heating on and off.
If an overhead lighting/heating gantry is fitted, it is controlled
by a switch on the support post.
Indicator
Lamps
The water level is monitored, according to the setting of the
mode switch, the lamp coming on if the level is too low.
Detector probes, positioned in the side of the well, ensure the
correct water level for three dish sizes and steam mode.
A second indicator lamp shows when the heating elements are operating.
Summary of Contents for IN-GNH03
