FoxGate S63 series, Configuration Manual, Page: 493 / 565

VRRP Configuration
492
is brief and smooth, hosts within the segment can use the Virtual Router as normal and
uninterrupted communication can be achieved.
59.2
VRRP Configuration Task List
Configuration Task List:
1. Create/Remove the Virtual Router (required)
2. Configure VRRP dummy IP and interface (required)
3. Activate/Deactivate Virtual Router (required)
4. Configure VRRP sub-parameters (optional)
（
1
）
Configure the preemptive mode for VRRP
（
2
）
Configure VRRP priority
（
3
）
Configure VRRP Timer intervals
（
4
）
Configure VRRP interface monitor
1. Create/Remove the Virtual Router
Command Explanation
Global Mode
router vrrp < vrid >
no router vrrp < vrid >
Creates/Removes the Virtual Router.
2. Configure VRRP Dummy IP Address and Interface
Command Explanation
VRRP protocol configuration mode
virtual-ip < ip >
no virtual-ip
Configures VRRP Dummy IP address; the
"no virtual-ip" command removes the
virtual IP address.
interface {IFNAME | Vlan < ID >}
no interface
Configures VRRP interface, the " no
interface " command removes the
interface.
3. Activate/Deactivate Virtual Router
Command Explanation
VRRP protocol configuration mode
enable Activates the Virtual Router.
disable Deactivates the Virtual Router.