RIPng
342
2
）
Configure the route offset
Command
Explanation
Router configuration mode
[no]
offset-list
<access-list-number
|access-list-name>
{in|out}
<number >
[
<ifname>
]
Configure that provide a deviation value to the
route metric value when the port sends or
receives RIPng data packet; the
no offset-list
<access-list-number
|access-list-name>
{in|out}
<number >
[
<ifname>
]
command
removes the deviation table.
3
）
Configure and apply route filter and route aggregation
Command
Explanation
Router configuration mode
[no]
distribute-list
{
<access-list-number
|access-list-name>
|
prefix
<prefix-list-name>
}
{in|out}
[
<ifname>
]
Set to filter the route when the interface
sends and receives RIPng data packets.
The
no
distribute-list
{
<
access-list-number |access-list-name >
|
prefix
<prefix-list-name>
}
{in|out}
[
<ifname>
]
command means do not set the
route filter.
[no]aggregate-address
<IPv6-address>
Configure route aggregation, the
no
aggregate-address
<IPv6-address
command cancels the route aggregation.
4
）
Configure split horizon
Command
Explanation
Interface configuration mode
IPv6 rip split-horizon [poisoned]
Configure that take the split-horizon when the
port sends data packets,
poisoned
means
with poison reverse.
no IPv6 rip split-horizon
Cancel the split-horizon.
3. Configure other RIPng protocol parameters
(1) Configure timer for RIPng update, timeout and hold-down
Command
Explanation
Router configuration mode
timers basic
<update> <invalid>
<garbage>
no timers basic
Adjust update, timeout and garbage recycle of
RIPng timer, the
no timers basic
command
restores the default configuration.