RIP
332
recv-buffer-size
<size>
no recv-buffer-size
The command configures the UDP receiving
buffer size of the RIP; the
no recv-buffer-size
command restores the system default values.
3. Configure RIP-I/RIP-II toggling
（
1
）
Configure the RIP version to be used in all ports
Command
Explanation
RIP configuration mode
version { 1 | 2 }
no version
Configure the versions of all the RIP data
packets transmitted/received by the Layer 3
switch port sending/receiving the
no version
command restores the default configuration,
version 2.
（
2
）
Configure the RIP version to send/receive in all ports.
（
3
）
Configure whether to enable RIP packets sending/receiving for ports
Command
Explanation
Interface configuration mode
ip rip send version { 1 | 1-compatible |
2 }
no ip rip send version
Sets the version of RIP packets to send on all
ports; the
no ip rip send version
command
set the version to the one configured by the
version command.
ip rip receive version {1 | 2 | }
no ip rip receive version
Sets the version of RIP packets to receive on
all ports; the no action of this command set
the version to the one configured by the
version command.
ip rip receive-packet
no ip rip receive-packet
Enables receiving RIP packets on the
interface; the
no ip rip receive-packet
command close data receiving on this port.
ip rip send-packet
no ip rip send-packet
Enables sending RIP packets on the interface;
the
no ip rip send-packet
command disables
sending RIP packets on the interface.
4. Delete the specified route in RIP route table
Command
Explanation
Admin Mode
clear
ip
rip
route
{
<A.B.C.D/M>
|kernel|static|connected
|rip|ospf|isis|bgp|all}
The command deletes a specified route from
the RIP route table.