RADIUS Configuration
451
radius-server key {0 | 7} <
string>
no radius-server key
To configure the encryption key for the
RADIUS server. The no form of this
command will remove the configured
key.
3. Configure the RADIUS server
Command
Explanation
Global Mode
radius-server
authentication
host
{<
ipv4-address
>
|
<
ipv6-address
>}
[port <
port-number
>]
[key
{0
| 7}
<string>
]
[primary]
[access-mode
{dot1x | telnet}]
no radius-server authentication host
{
<ipv4-address
> | <
ipv6-address
>
Specifies the IPv4/IPv6 address and the
port number, whether be primary server
for RADIUS accounting server; the no
command
deletes
the
RADIUS
accounting server.
radius-server
accounting
host
{
<ipv4-address>
|
<ipv6-address>
}
[port
<port-number>
] [key {
0
| 7}
<string>
] [primary]
no radius-server accounting host
{
<ipv4-address> | <ipv6-address>
}
Specifies the IPv4/IPv6 address and the
port number, whether be primary server
for RADIUS accounting server; the no
command
deletes
the
RADIUS
accounting server.
4. Configure the parameter of the RADIUS service
Command
Explanation
Global Mode
radius-server dead-time
<minutes>
no radius-server dead-time
To configure the interval that the RADIUS
becomes available after it is down. The
no form of this command will restore the
default configuration.
radius-server retransmit
<retries>
no radius-server retransmit
To configure retry times for the RADIUS
packets. The no form of this command
restores the default configuration.
radius-server timeout
<seconds>
no radius-server timeout
To configure the timeout value for the
RADIUS server. The no form of this
command
will
restore
the
default
configuration.