FoxGate S63 series, Configuration Manual, Page: 211 / 565

Flexible QinQ Configuration
210
2. Create flexible QinQ policy-map to relate with the class-map and set the corresponding
operation
3. Bind flexible QinQ policy-map to port
1. Configure class map
Command Explanation
Global mode
class-map < class-map-name>
no class-map < class-map-name>
Create a class-map and enter
class-map mode, the no command
deletes the specified class-map.
match {access-group < acl-index-or-name >
| ip dscp < dscp-list >| ip precedence
< ip-precedence-list >| ipv6 access-group
< acl-index-or-name >| ipv6 dscp
< dscp-list > | ipv6 flowlabel <flowlabel-list>
| vlan <vlan-list> | cos < cos-list >}
no match {access-group | ip dscp | ip
precedence|ipv6 access-group| ipv6 dscp |
ipv6 flowlabel | vlan | cos}
Set the match standard of class-map,
(classify data flow by ACL, CoS, VLAN
ID, IPv4 Precedent or DSCP, etc for
the class map); the no command
deletes the specified match standard.
2. Configure policy-map of flexible QinQ
Command Explanation
Global mode
policy-map < policy-map-name>
no policy-map < policy-map-name>
Create a policy-map and enter
policy-map mode, the no command
deletes the specified policy-map.
class < class-map-name> [insert-before
<class-map-name> ]
no class < class-map-name>
After a policy-map is created, it can
be associated to a class. Different
policy or new DSCP value can be
applied to different data flows in class
mode; the no command deletes the
specified class-map.
set s-vid < vid>
no set s-vid
Set external VLAN Tag for the
classified traffic, no command
cancels the operation.
add s-vid <vid>
no add s-vid <vid>
Add external VLAN Tag for the
classified traffic, no command