FoxGate S6124, Command Manual

Page: 313 / 391

313
<portName> }
Function: Display the number of dynamic MAC of corresponding port.
Parameters: < vlan-id > display the specified VLAN ID. This option is not supported by
switch.
<portName> is the name of layer-2 port.
Command Mode: Any mode
Usage Guide: Use this command to display the number of dynamic MAC of
corresponding port.
Examples: Display the number of dynamic MAC of the port which are configured with
number limitation function of MAC.
Switch(config)# show mac-address dynamic count interface ethernet 1/3
Port MaxCount CurrentCount
-----------------------------------------------------------------------------------------------------
Ethernet1/3 5 1
-----------------------------------------------------------------------------------------------------
29.3 debug switchport mac count
Command: debug switchport mac count
no debug switchport mac count
Function: When the number limitation function debug of MAC on the port, if the number
of dynamic MAC and the number of MAC on the port is larger than the max number
allowed, users will see debug information.‖
no debug switchport mac count
‖ command
is used to disable the number limitation function debug of MAC on the port.
Parameters: None
Command Mode: Admin Mode
Default Settings: None
Usage Guide: Display the debug information of the number of dynamic MAC on the port.
Examples:
Switch#debug switchport mac count
%Jun 14 16:04:40 2007 Current mac count 21 is more than or equal to the maximum limit
in port Ethernet1/1
!!%Jun 14 16:04:40 2007 Mac learning will be stopped and some mac will be delete !!