251
24.1.9 multicast destination-control
Command: multicast destination-control
no multicast destination-control
Function:
Configure to globally enable multicast destination control. The no operation of
this command is to recover and disable the multicast destination control globally.
Parameters:
None.
Default:
Disabled.
Command Mode:
Global Configuration Mode.
Usage Guide:
Only after globally enabling the multicast destination control, the other
destination control configuration can take effect. The destination access list can be
applied to ports, VLAN-MAC and SIP. After configuring this command, IGMP-SNOOPING,
MLD-SNOOPING and IGMP will match according to the rules mentioned above when
they try to add ports after receiving IGMP-REPORT.
Example:
Switch(config)# multicast destination-control
Switch(config)#
24.1.10 show ip multicast destination-control
Command: show ip multicast destination-control [detail]
show ip multicast destination-control interface <Interfacename> [detail]
show ip multicast destination-control host-address <ipaddress> [detail]
show ip multicast destination-control <vlan-id> <mac-address> [detail]
Function:
Display multicast destination control
Parameter:
detail: expresses if it display information in detail or not..
<interfacename>: interface name or interface aggregation name, such as
Ethernet1/1, port-channel 1 or ethernet1/1.
Default:
None
Command Mode:
Admin Mode and Global Mode
Usage Guide:
The command displays multicast destination control rules of configuration,
including detail option, and access-list information applied in detail.
Example:
Switch (config)#show ip multicast destination-control
ip multicast destination-control is enabled
ip multicast destination-control 11.0.0.0/8 access-group 6003
ip multicast destination-control 1 00-03-05-07-09-11 access-group 6001
multicast destination-control access-group 6000 used on interface Ethernet1/13
Summary of Contents for S6124
Page 311: ...311 Machine...
Page 314: ...314...
