120
Parameter:
<timer-value>
is the value for GARP leaveall timer, the valid range is 100 to
327650 ms.
Command mode:
Global Mode.
Default:
The default value for leaveall timer is 10000 ms.
Usage Guide:
When a GARP application entity starts, the leaveall timer is started at the
same time. When the leaveall timer is over, the GARP application entity will send a
leaveall message. Other application entities will cancel all property information for that
application entity, and the leaveall timer is cleared for a new cycle.
Example:
Set the GARP leaveall timer value to 50000 ms.
Switch(config)#garp timer leaveall 50000
10.1.7 name
Command: name
<vlan-name>
no name
Function:
Specify a name, a descriptive string, for the VLAN; the no operation of the
command will delete the name of the VLAN.
Parameters: <vlan-name>
is the specified name string.
Command Mode:
VLAN Configuration Mode.
Default:
The default VLAN name is vlanXXX, where xxx is VID.
Usage Guide:
The switch can specify names for different VLANs, making it easier for
users to identify and manage VLANs.
Examples:
Specify the name of VLAN100 as TestVlan.
Switch(Config-Vlan100)#name TestVlan
10.1.8 private-vlan
Command: private-vlan {primary | isolated | community}
no private-vlan
Function:
Configure current VLAN to Private VLAN. The ―
no private-vlan
‖ command
cancels the Private VLAN configuration.
Parameter: primary
set current VLAN to Primary VLAN,
isolated
set current VLAN to
Isolated VLAN,
community
set current VLAN to Community VLAN.
Command Mode:
VLAN mode
Default:
Private VLAN is not configured by default.
Usage Guide:
There are three Private VLANs:
Primary
VLAN,
Isolated
VLAN and
Community
VLAN. Ports in Primary there are three Private VLANs: Primary VLAN,
Isolated VLAN and Community VLAN can communicate with ports of Isolated VLAN and
Summary of Contents for S6124
Page 311: ...311 Machine...
Page 314: ...314...
