FoxGate S6124, Command Manual

Page: 161 / 391

161
13.13 queue bandwidth
This command is not supported by the switch.
13.14 set
Command: set {ip dscp <new-dscp> | ip precedence <new-precedence> | ipv6 dscp
<new-dscp> | cos <new-cos> }
no set {ip dscp <new-dscp> | ip precedence <new-precedence> | ipv6
dscp <new-dscp> | cos }
Function: Assign a new DSCP, IP Precedence for the cl
assified traffic; the ―no‖ form of
this command delete assigning the new values.
Parameter: ip dscp < new-dscp> new DSCP value; ip precedence < new-precedence>
new IPv4 Precedence; ipv6 dscp < new-dscp > new IPv6 DSCP value; cos < new cos >
new COS value.
Default: Not assigning by default.
Command Mode: Policy Class-map Mode
Usage Guide: Only the classified traffic which matches the matching standard will be
assigned with the new values.
Note: ipv6 flowlabel configuration is not supported by this switch.
Example: Set the IP DSCP of the packets matching the c1 class rule to 3.
Switch(config)#policy-map p1
Switch(Config-PolicyMap-p1)#class c1
Switch(Config-PolicyMap-p1-Class-c1)#set ip precedence 3
Switch(Config-PolicyMap-p1-Class-c1)#exit
Switch(Config-PolicyMap-p1)#exit
13.15 service-policy
Command: service-policy input < policy-map-name>
no service-policy input < policy-map-name>
Function: Applies a policy map to the port; the no command deletes the specified policy
map applied to the port.
Parameters: input < policy-map-name > applies the specified policy map to the ingress
of switch port.