126
10.1.17 switchport trunk native vlan
Command: switchport trunk native vlan <
vlan-id>
no
switchport trunk native vlan
Function:
Set the PVID for Trunk port; the ―
no
switchport trunk native vlan
‖ command
restores the default setting.
Parameter: <
vlan-id>
is the PVID for Trunk port.
Command mode:
Port Mode.
Default:
The default PVID of Trunk port is 1.
Usage Guide:
PVID concept is defined in 802.1Q. PVID in Trunk port is used to tag
untagged frames. When a untagged frame enters a Trunk port, the port will tag the
untagged frame with the native PVID set with this commands for VLAN forwarding.
Example:
Set the native VLAN for a Trunk port to 100.
Switch(config)#interface ethernet 1/5
Switch(Config-If-Ethernet1/5)#switchport mode trunk
Switch(Config-If-Ethernet1/5)#switchport trunk native vlan 100
Switch(Config-If-Ethernet1/5)#exit
10.1.18 vlan
Command: vlan WORD
no vlan WORD
Function:
Create VLANs and enter VLAN configuration mode. If using ';' and '-' connect
with multi-VLANs, then only create these VLANs. If only existing VLAN, then enter VLAN
configuration mode; if the VLAN is not exist, then create VLAN and enter VLAN
configuration mode. In VLAN Mode, the user can set VLAN name and assign the switch
ports to the VLAN. The no command deletes specified VLANs.
Parameter:
WORD is
the VLAN ID to be created/deleted, valid range is 1 to 4094,
connect with ';' and '-'.
Command mode:
Global Mode.
Default:
Only VLAN1 is set by default.
Usage Guide:
VLAN1 is the default VLAN and cannot be configured or deleted by the
user. The maximal VLAN number is 4094. It should be noted that dynamic VLANs learnt
by GVRP cannot be deleted by this command.
Example:
Create VLAN100 and enter the configuration mode for VLAN 100.
Switch(config)#vlan 100
Switch(Config-Vlan100)#
Summary of Contents for S6124
Page 311: ...311 Machine...
Page 314: ...314...
