106
7.12 show lldp
Command: show lldp
Function:
Display the configuration information of global LLDP, such as the list of all the
ports with LLDP enabled, the interval of sending update messages, the configuration of
aging time, the interval needed by the sending module to wait for re-initialization, the
interval of sending TRAP, the limitation of the number of the entries in the Remote Table.
Parameters:
None.
Default:
Do not display the configuration information of global LLDP.
Command Mode:
Admin Mode, Global Mode.
Usage Guide:
Users can check all the configuration information of global LLDP by using
―show lldp‖.
Example:
Check the configuration information of global LLDP after it is enabled on the
switch.
Switch(config)#show lldp
-----LLDP GLOBAL INFORMATIONS-----
LLDP enabled port : Ethernet 1/1
LLDP interval :30
LLDP txTTL :120
LLDP txShutdownWhile :2
LLDP NotificationInterval :5
LLDP txDelay :20
-------------END------------------
7.13 show lldp traffic
Command:
show lldp traffic
Function:
Display the statistics of LLDP data packets.
Parameters:
None.
Default:
Do not display the statistics of LLDP data packets.
Command Mode:
Admin Mode, Global Mode.
Usage Guide:
Users can check the statistics of LLDP data packets
by using ―show lldp
traffic‖.
Example:
Check the statistics of LLDP data packets after LLDP is enabled on the switch.
Switch(config)#show lldp traffic
PortName Ageouts FramesDiscarded FramesInErrors FramesIn FramesOut TLVsDiscarded TLVsUnrecognized
-------------- ------- --------------- -------------- -------- --------- ------------- ----------------
Summary of Contents for S6124
Page 311: ...311 Machine...
Page 314: ...314...
