Serial ATA RAID User’s Guide
The Members tab of this window reports the device identification
(corresponding with the information in the BIOS) and the State of each
device.
Besides reporting information, the Members tab of a Mirrored set allows the
user to remove a specific drive from that set, as well as add a designated
Spare drive to a Mirrored set that has experienced a disk failure. A drive can
NOT be removed from a Striped set as this would destroy all data. Note that
when a Mirrored Set is first created, the State of the “destination” drive may
report as Rebuild for as much as 30-90 minutes depending on the size of the
disk.
SMART and Configuration information, as well as Data Identification is again
provided for each Set.
Click here
60
