Serial ATA RAID User’s Guide
3. You will have two selections to create a RAID 1 array.
The default
value is <1>
. If you select
<1>Auto Create
, you can create a RAID 1
array faster and easier. The result after creating will be shown on
step 5
.
Besides, you also can select
<2>Manual Create
, see following steps.
4. Use
<↑> <↓>
to select disk , and press <Enter> to select disk, <Q> to
exit. When you press <Enter> on the disk you wanted, the RAID Type
will be changed from
Single
to
RAID 1
. The same as RAID 0, the disk
you select first will be the SOURCE disk.
15
