Serial ATA RAID User’s Guide
b) After “Available RAID” selected, click the button “Available Disk” to find
whether any empty hard disk existing. See below:
Next, highlight the empty hard disk you want to select. And you can click
the button “OK” to continue or click “Cancel” to give up this selection.
c) When the “Available Raid” and “Available Disk” is finished, you can click
the button “Start” to start this operation. And the button “Start” will
become “Pause”. Then you can click the button “Pause” to pause the
thread operation. And the button “Pause” will become “Start”. Or you can
click the button “Stop” to cancel this operation. This operation can be
broken off if you want to close this RAID utility or shut down your
computer, and it can continue when you open this RAID utility again or
restart you computer next time.
42
