Serial ATA RAID User’s Guide
4. From the “Available Disks” pane, select the disk and click downward
arrow icon or double click it to add the disk on the “Selected Disks”
pane. This action is the same as the operation to create a JBOD array.
5. When the RAID0 array’s configuration is finished, click the button
“Create”. Then a “Create Stripe RaidSet” dialog will be popup.
<Note>
Source :
The first selected disk.
Target :
All other disks but first one.
Create Only :
This operation will destroy all data on all the selected
disks and create a clean stripe array without any data
on it.
<Split data into Raid0 Set>
Source is NOT a boot device:
Split operation will split data from
source disk into all the selected
disks. In this operation, the source
disk can’t be a boot device.
Source is a boot device:
This operation is similar to “Source is NOT
a boot device” operation, but the source
disk is a boot device.
33
